中文  |  ENGLISH

Header-and-coil technology celebrates 10 years leakage-free operation with Aalborg CSP heat exchangers

2019.03.19     From: CSPFocus光略咨询

The Aalborg CSP header-and-coil technology celebrates its 10-years leakage free anniversary in 2019. The company’s first header-and-coil type heat exchangers, used in the Solnova plants near Sevilla in Spain, has a unique design, which is well-known from conventional and power plant boilers. The design reduces the thermal stress profile on the equipment and thereby eliminates the risk of leakage and provides a reliability close to 100% for CSP plant owners.

 

Heat exchangers are used in concentrated solar power plants for Steam generation systems (SGS) and Oil-to-Salt heat exchanger systems and are key components linking the solar field to the thermal energy storage (TES) as well as the power block producing electricity. SGS and Oil-to-Salt TES systems consist of multiple heat exchangers connected in series or parallel. An SGS consists of a superheater, a reheater, an economizer and an evaporator unit with a steam drum, while an Oil-to-Salt TES system consists of a required number of heat exchangers connected in series between the cold and hot molten salt tank. Although the heat exchangers constitute only a small percentage of the overall value of a plant compared to other key components, the equipment is critical in terms of securing continuous reliable power production. If failure occurs, the entire solar plant must be shut down for repairs, contributing to loss in power production and thus loss of revenue.


Leakages in the TEMA type tube bundles are one of the main causes for breakdowns in CSP plants across the world and have a significant impact on a plant’s availability and thereby profitablity. Each time a tube leaks, the entire system must be shut down in order for the tube to be plugged or a gasket to be replaced. 




Proven track record of 10 years leakage-free operation


Heat exchangers must be able to withstand the frequent starts/stops and daily cyclical load changes that are typical to CSP plants. The Aalborg CSP heat exchangers are based on the header-and-coil-technology, which is inspired by traditional boiler technology. They are 100% welded, designed according to ASME and EN standards. This eliminates leakages and significantly reduces the number of failures (to close to zero) over the lifetime expectancy of the equipment. This results in high availability and low operation and maintenance cost. Since 2009, more than 45 header-and-coil type heat exchangers containing more than 40,000 welds have been produced by Aalborg CSP based on these design principles, and all have been operating without any leakage failures. This includes the Godawari 50 MW solar thermal project, which has been operating since 2013. 


Aalborg CSP header-and-coil equipment


"It gives me immense pleasure that the steam generator supplied by Aalborg for our 50 MW solar thermal project has been working perfectly fine for almost six years now. The operation has been smooth and seamless and with almost no maintenance and with no leakages in the header-and-coil tube bundle" - says Sudeep Chakraborty, Godawari Green Energy Limited.


Since 2013 Aalborg CSP has provided a free of charge five-year guarantee against leakages for its header-and-coil type heat exchangers, setting new standards within the CSP industry. With this year’s celebration of 10 years leakage-free operation, the company once again proves the benefits and advantages of the header-and-coil technology. Last month, this recognized technology leadership resulted in the largest order in terms of megawatt power. The company increased the number of heat exchangers with the signing of a 600 MWe order for delivery of 42 heat exchangers and pressure vessels for the world’s largest CSP project in Dubai.  


 “The problem with the TEMA type heat exchangers has finally been recognized by the industry, and we are thankful that the technical specification finally allowed header-and-coil technology for heat exchangers in DEWA. Once plant owners and developers understand the real benefits of the header-and-coil technology, I am certain this will be the only allowed technology in new plants as well as for replacing old TEMA type plants. The benefits and value-add is simply too good to ignore.” – says Svante Bundgaard, CEO of Aalborg CSP. 


About Aalborg CSP A/S


Aalborg CSP A/S is a leading developer and supplier of innovative renewable technologies and thermal systems aiming towards changing the way energy is produced today. Relying on extensive experience from some of the most efficient CSP projects around the world, the company designs and delivers green technologies and integrated energy systems to lower the cost of energy for industries and power plants worldwide.


Aalborg CSP places strong focus on R&D activities and partners with knowledge-based companies and institutions to create leading-edge technologies. As a result, the Aalborg CSP engineering design is centred on a value-adding concept providing solutions that excel in operation, increase plant revenue and contribute to a greener future.


Headquartered in Aalborg (Denmark) and with sales & service offices in Spain and Australia, Aalborg CSP has realised cost effective green energy solutions to a variety of industries worldwide.



Upcoming CSP events:


9th Annual CSP Focus China 2019(Mar.21-22, Beijing)

4th Annual CSP Focus MENA 2019(Jun.26-27, Dubai)


More CSP news and reports please visit www.cspfocus.cn 

or CSP Focus social media on LinkedInTwitterFacebook

Leave your thoughts here

Free Reports

See more+
  • Dubai 950MW NOOR Energy 1 CSP+PV Project

    The $4.4 billion Noor Energy 1 solar thermal project will be the world’s largest CSP plant and includes a 100 MW CSP tower plant, three 200 MW parabolic trough CSP systems, 250 MW of PV capacity and 15 hours of molten salt CSP storage capacity.

  • China Large-scale CSP Projects Update

    Updating--Jan., 2020 Edition24 pagesPart 1: Background and Fact Sheet (P1-11) · Implementation and adjustment of 1st batch of CSP demonstrations· FiT policy update and prediction· Sum-up on the 20 projects technology, location, ownership and key participants Part 2: Milestones of Ch

  • Suppliers List of China Key CSP Projects (Updating)

    13 key concentrated solar power projects in China undergoing:Shouhang Dunhuang 100MW Molten Salt Parabolic Trough ProjectRoyal Tech Yumen 50MW Parabolic Trough ProjectDCTC Dunhuang 50MW MS CLFR ProjectRayspower Yumen 50MW Trough ProjectCNNC Royal Tech Urad 100MW Parabolic Trough ProjectSupcon Delingha 50MW Molten Salt Tower ProjectLuNeng Haixi 50 MW Solar Thermal Tower Plant ProjectPower C

  • Construction and Operation of SUPCON SOLAR Delingha 50MW Tower CSP Project

    40 pages in totalCompany Profile (P3-4)Construction of Delingha 50MW Tower CSP Project (P6-17)Operation of Delingha 50MW Tower CSP Project (P18-30)Issues during Commissioning and Operation (P31-39)

Upcoming Events

See more+

Project Updates

See more+

CONTACT US

Tex:+86-21-6111 0177

Email:csp@cspfocus.cn


备案/许可证编号为:沪ICP备17051021号

Wechat public platform

Follow CSP Focus for more news